Webafrica Help CentreNetwork Status
WebafricaHome page

How to Set Up the MTN LTE APN on a Huawei B612

To set up a Huawei B612 for Webafrica MTN LTE, insert the Micro SIM into the slot on the bottom of the router, plug in the power and connect to the router's WiFi (details on the label). Go to 192.168.8.1 and log in (the default password is admin). Click Network Settings, then the plus (+) icon, and add Profile Name "WebafricaAPN" with the APN "ws.dd.fwa", leaving the user name and password blank. Click Save, set Preferred network mode to "4G only" under Mobile Network Searching, then restart your router.

Here's how to get your Huawei B612 up and running, from popping in your SIM to adding the Webafrica MTN APN. It takes about 10 minutes.

Before you start

What's in the box?

  • Huawei B612 router
  • Power cable
  • Network (Ethernet) cable
  • Webafrica MTN LTE SIM card

Webafrica MTN LTE APN settings

SettingValue
Profile NameWebafricaAPN
User nameLeave blank
PasswordLeave blank
APNws.dd.fwa

The Profile Name is just a label, so call it whatever you like. The APN itself must be ws.dd.fwa.

How to set up your router

  1. Pop in your SIM

    Your router takes a Micro SIM, so pop out the middle size from the SIM card. The SIM slot is on the bottom of the router, with a handy sticker showing which way it goes in.

  2. Plug in the power

    Plug the power cable into the power socket on the back of the router, then into the wall. The light on the front will come on.

  3. Connect to your router

    Find the WiFi name and password on the back of the router, then connect your phone or computer to that WiFi network. Didn't connect first time? Double-check the password and make sure Caps Lock is off.

  4. Log in to your router

    Open your browser and type 192.168.8.1 in the address bar. Log in with the password on the router's label (the default is admin).

  5. Open the APN list

    Click Network Settings at the top of the page. You'll see the APN list. Click the plus (+) icon to add a new APN.

  6. Add the Webafrica APN

    Enter the settings from the table above, leaving the user name and password blank. Scroll down and click Save. Your new APN will show as the default in the list.

    APN profile settings for Webafrica MTN LTE on a Huawei B612
  7. Set the network mode to 4G only

    Click Mobile Network Searching on the left. Set Preferred network mode to 4G only and click Save.

  8. Restart your router

    Restart the router and give it a few minutes to connect. You should now be online!

A factory reset wipes your APN. If you reset your router, pop the APN back in before testing your connection.

Was this article helpful?