Webafrica Help CentreNetwork Status
WebafricaHome page

How to Check or Change Your Webafrica Telkom LTE APN

Your Webafrica Telkom LTE APN is "webafrica". Leave the username and password blank and set authentication to None or Auto. Your router should already have these settings. To check or change them, log in to your router (the address is on its label), find Network, Mobile Network, Dial-up, Profile Management or APN Settings, create or edit the profile with APN "webafrica", save it as the default and restart your router. Only change your APN if you've been asked to or you've confirmed it's wrong.

Your APN (Access Point Name) is the setting your Telkom LTE router uses to connect to the internet. In most cases, your router already has the correct APN and you won't need to change a thing. If you've been asked to check or update it, here's how.

Webafrica Telkom LTE APN settings

SettingValue
APNwebafrica
UsernameLeave blank
PasswordLeave blank
AuthenticationNone or Auto

Only change your APN if you've been asked to, or you've confirmed your router is using the wrong one.

How to change your APN

The steps may look slightly different depending on your router.

  1. Connect to your router

    Connect your phone, tablet or computer to your LTE router using WiFi or a network cable.

  2. Log in to your router

    Open your browser and type your router's IP address in the address bar. You'll usually find it on the label underneath or at the back of the router. Log in with the router's admin username and password.

  3. Find the APN settings

    Look for Network, Mobile Network, Dial-up, Profile Management or APN Settings.

  4. Add or edit the APN profile

    Create a new profile or edit the existing one. Enter webafrica as the APN and leave the username and password blank.

  5. Save and restart

    Save the settings and make the profile the default if asked. Restart your router and give it a few minutes to reconnect.

Can't find your APN settings?

Router menus differ between makes and models, so the APN option may be somewhere else in your router's settings. Check the label on your router for its model number and login details.

Still can't connect?

If your APN is correct but your Telkom LTE still isn't connecting:

  1. Restart your router.
  2. Check that the SIM card is inserted correctly.
  3. Check that the router is picking up a Telkom mobile signal.

You can also factory reset your router. This removes any settings you've changed, including your WiFi name and password, so you'll need to set them up again afterwards. After a reset, check that the APN is set to webafrica before testing your connection.

Got Webafrica 5G powered by Comsol? It uses different APN settings. See how to set up your Webafrica Comsol 5G APN.

Was this article helpful?